Serial Number:

85092079

Status:

Abandoned-After ex parte Appeal

Filing Date:

07-23-2010

Registration Date:

N/A

Mark Description:

The mark consists of a base assembly of an electric toothbrush. The base assembly includes a base or lower portion, approximately 1 �� inches high, with the lower edge thereof being circular, approximately 7/8 inches in diameter. On the base portion, ovals appear in the middle thereof, going around the entire base portion. The diameter of the base portion remains the same from the lower edge to a point approximately 5/8 inch from the lower edge and then curves inwardly gradually and smoothly to an upper edge. Extending from the upper edge of the base portion is an intermediate portion. The intermediate portion has two parts. The first part has a lower edge which mates with the upper edge of the base portion and has an upper edge which is angled approximately 10�� from the longitudinal axis of the base portion. The exterior of the first part continues the slight inward curve of the base portion. The second part mates with the upper edge of the first part and has an upper edge which mates with the lower edge of an extending stem portion. The exterior surface of the second part has a greater curvation than the first part, such that the boundary between the first and second parts is discernable. Extending from the upper edge of the intermediate portion is the stem portion which is circular in cross-section and is elongated. At the upper end of the stem portion is a bristle plate portion with toothbrush bristles. The stem portion extends at an angle of approximately 10�� relative to the longitudinal axis of the base portion. The matter shown in broken lines, specifically the bristle plate portion, toothbrush bristles and stem portion are not part of the mark and serve only to show the position of the mark.

Type of Mark:

Trademark

Owner:

Abandon Date:

12-10-2014

Correspondent Name: